Less wobble.
More coffee.
A steady table is a small kind of happiness. Find the lifted foot, measure the gap, and make the fix that fits.
Press. Don’t guess.
Empty the table. Check loose joints first. Gently press A → B → C → D and identify the lifted foot.
Mind the little gap.
With three feet supported, measure the fourth gap. Enter the actual thickness, not a phone tilt reading.
Shim. Press. Repeat.
Fit a secure shim under the measured foot. Repeat the corner test and adjust gradually. Check the top separately with a level.
A small gap. A precise plan.
For rigid rectangular four-leg tables. Start with a real measurement; no sensors or guesswork required.
Diagnose
Keep the other three feet touching the floor. Measure the gap under the lifted foot with a ruler or measured shim.
This calculator is for rigid, rectangular four-leg tables. For a pedestal, inspect the base and fasteners. Do not apply the four-leg formula.
Your fix receipt
Start with a measured gap. The recommendation will appear here.
Field verification pending. Levelness is not measured.
Precision, without the fuss.
Precision Lab · Four-leg balance calculator
For a rigid table with rectangular contact points. Enter each leg length and local floor elevation, in mm. A and C are opposite corners.
H = leg length + floor elevation; Δ = (H_A + H_C) − (H_B + H_D). Coplanarity is not levelness. This ideal geometry cannot identify the actually lifted leg from lengths alone. It ignores flex, wide feet and joint movement.
The Shim Recipe Lab
Build a better stack
Fewest pieces for an exact match at 0.1 mm resolution. Unlimited stock assumed; avoid unstable tall stacks.
Wedge insertion calculator
Linear wedge with a zero-thickness tip: insertion = length × target / maximum thickness. Actual contact and compression differ.
Choose your material
| Material | Best use / limitation |
|---|---|
| Plastic shim | Firm and water resistant; check grip. |
| Firm rubber | Good grip; compression varies. |
| Cork / felt | Floor protection; may compress. |
| Paper / napkin | Temporary only; moisture and load change height. |
No material is universally best. Keep the whole foot supported, avoid trip hazards and follow the furniture maker’s guidance.
A quarter turn.
A little mathematics.
On a gently varying continuous floor, a perfect square table with equal legs can find a stable position by rotation under the theorem’s geometric and slope conditions. Cracked tiles, steps and unequal legs break those assumptions.
This is a synthetic saddle-shaped floor experiment, not a prediction of your room. Stability does not imply a level tabletop.
Read the mathematical paper ↗Toy model: floor z = 0.4xy mm, corners at (±1, ±1), rotated together. Δ = 1.6 cos(2θ) mm.
Your café, a little steadier.
Open Café Floor Map
A local opening checklist for your café. Select a table to edit its label, condition and repair note. Records stay in this browser; export a backup for another device.
Table notes
Small questions. Solid answers.
Why does a four-legged table wobble?
The four feet may not lie on one support plane because of uneven ground or unequal effective leg lengths. Loose joints or a flexible frame can also cause movement. Check the structure before adding a shim.
Does wobble-free mean level?
No. All four feet can touch a sloping floor while the tabletop remains tilted. Use a separate level and adjust the legs if you need a level surface.
Can my phone measure the gap automatically?
This tool does not access device sensors. A phone angle alone cannot establish the clearance under a foot. Measure the actual gap and enter it yourself.
How thick should a furniture shim be?
Start with the gap measured while the other three feet remain supported. Recheck after fitting, because soft materials compress and contact conditions change. Avoid forcing an oversized shim.
What if the table still moves?
Recheck loose fasteners, worn feet, moving joints and floor contact. Stop using damaged furniture and seek appropriate repair. This tool does not assess structural strength or load capacity.